- About Us
- Tech Info
Designed for racing classes that require a stock type clutch. Installs by replacing one bolt on the front of the transmission. Conical shims are provided for proper fit. Made to work with Saginaw, T-10, Muncie and Jerico transmissions but has been used on others with the same diameter bearing retainer. The I.D. of the throw out bearing is 1.379”, make sure your transmission will accept this. Compressed it is 1.688” thick and extended it reaches 2.375” providing .688” of travel. A 3/4” bore master cylinder and a minimum 6:1 ratio pedal is recommended for comfortable operation. Pressure exceeding 1,500 psi. can damage the O-rings.
82870 Does not fit T-5 transmission without modification to the bearing retainer (nose cone). For T5 use part number 82876. Works with OEM and OEM replacement clutches.
Notes: Never use petroleum or mineral base fluids; only DOT 3 or equivalent non-silicone brake fluid.